Error Codes

Error Code 112

Error Code 112: TIME-OUT WAITING FOR LEADING EDGE AT REJECT

Resolution:

1. Inspect for jammed currency in the transport path between the width sensors and the reject sensor. Remove jammed currency.

2. Verify that all access panels are closed and secured. Clear the error. Test the dispenser by completing several test dispenses.

3. If the error clears, put the ATM in service. If these actions have no effect on dispenser operation, replace the dispenser mechanism.

Need a new dispenser? Check out these ATM dispensers for sale

Error Code 113

Error Code 113: TIME-OUT WAITING FOR TRAILING EDGE AT REJECT

Resolution: 

1. Inspect for a jammed currency in the reject sensor.

2. Verify that all access panesl are closed and secured. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen, push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Test the dispenser by completing several test dispenses.

4. If the error clears, put the ATM in service. If these actions have no effect on dispenser operation, replace the dispenser.

Error Code 129

Error Code 129: NO RESPONSE FROM THE DISPENSER MECHANISM

Resolution:

See the recommended action for Error Code 128.

Error Code 2130500

Error Code 2130500

Result: Paper not found at SS2 before cutting paper at SPR

Solution:

1. Check printer cutter carefully

2. Check if paper is jammed newer SS2 on path or if SS2 works well

3. Replace printer head assembly or whole SPR