Error Codes
Error Code 306
Error Code 306: FAILURE TO FEED
Resolution:
1. Check the condition of the currency to ensure that it is fit for dispensing.
2. Verify that the cassettes are operating correctly.
3. Replace the cassette if needed.
4. Check the operation of the note feeder sensors with the NMD Test Sofware. Clean the note feeder sensors as needed.
5. Replace the note feeder if necessary.
Error Code 3084000
Error Code: 3084000
Result: No response from MCRW when MCRW version number is read
Error Code 307
Error Code 307: TRANSMISSION ERROR
Resolution:
1. Inspect all communication cables to make sure they are not damaged and are properly connected to their termination points.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Clear the error.
4. Complete a test dispense. If the error code is reported again, replace the CMC module. Otherwise, put the ATM into service.