Error Code 307

RSS

Error Code 307: TRANSMISSION ERROR

Resolution: 

1. Inspect all communication cables to make sure they are not damaged and are properly connected to their termination points.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Clear the error.

4. Complete a test dispense. If the error code is reported again, replace the CMC module. Otherwise, put the ATM into service.

Previous Post Next Post