1. Home
  2. Error Codes

Error Codes

RSS

Error Code 46

Error Code 46: EXIT QUANTIFIED

Resolution:

1. A mechanical error has occurred. It may be necessary to replace the dispenser.

Error Code 45

Error Code 45: DIVERTER ERROR

Resolution:

1. Inspect the feed path for any jammed notes. Remove any jammed notes.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Clear the error. Purge the dispenser with the purge command. Complete several live dispenses to ensure the dispenser is working correctly. If the error persists, replace the dispenser.

Need a new dispenser? Check out these ATM dispensers for sale

Error Code FFFFFFF

Error Code FFFFFFF: NVRAM IS BROKEN 

Resolution:

1. Reset Master Password.

2. Clear NVRAM.

Error Code 206

Error Code 206: SPED KEYPAD COULD NOT PERFORM A SUCCESSFUL COMMAND WITHIN SPED_MAX_ATTEMPTS TRIES

Resolution:

1. Status valid only for units with SPED keypad device installed.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Clear the error.

4. If the error persists, replace the SPED keypad module.