Error Code 206
Error Code 206: SPED KEYPAD COULD NOT PERFORM A SUCCESSFUL COMMAND WITHIN SPED_MAX_ATTEMPTS TRIES
1. Status valid only for units with SPED keypad device installed.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Clear the error.
4. If the error persists, replace the SPED keypad module.