Error Codes
Error Code 573
Error Code 573: SPED KEYS FROM PAD CMD VERIFY FAILED
Resolution:
1. Inspect the cable from the Main Board assembly to the SPED module for damage. Make sure that the cable is connected at both ends.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Clear the error. If the error persists, replace the SPED module.
Error Code 572
Error Code 572: SPED KEY FROM PAD CMD ABORTED BY USER
Resolution: Inspect the cable from the main board assembly to the SPED module for damage. Make sure that the cable is connected at both ends. Restart the ATM. Clear the error. If the error persists, replace the SPED module.
Error Code 97C0140
Error Code: 97C0140
Result: Fail to create sensor polling thread
Resolution:
Restart the system