Error Code 56


Error Code 56: LINK ERROR


1. Configuration jumpers may have been changed. Inspect jumper block LK5 on the dispenser main board. There should be no jumpers installed.

2.  Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. If the problem persists, replace the dispensing mechanism.

Need a new dispenser? Check out these ATM dispensers for sale

Previous Post Next Post