Error Code 356
Error Code 356: ERROR IN NOTE TRANSPORT
Resolution:
1. Inspect the note transport sensor for blockage. If the sensor is blocked, remove the blockage. Clean the sensors if needed.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Reset the error. Complete several test dispenses and a live dispense. If the error code continues, replace the note transport module. Otherwise, put the ATM into service.
Need a new dispenser? Check out these ATM dispensers for sale