Error Code 348




1. Inspect all cables for possible damage. Ensure that each cable is securely fastened to its termination point.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Reset the error. If the response to the Reset command indicates a successful execution, complete several test dispenses to verify proper operation. If the error code is reported again, it may be necessary to replace the CMC or one of the note feeder controllers.

Previous Post Next Post