Error Code 330




Inspect all cables for damage.

1. Verify that both ends of each cable are securely connected to its termination points.

2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

3. Reset the error. Complete several test dispenses and a live transaction. If the error repeats, check with Triton Systems Technical Support for known software incompatibilities. Otherwise, put the ATM into service.

Previous Post Next Post