Error Code 205
Error Code 205: SPED KEYPAD REPORTED TAMPER CONDITION
Resolution:
1. Status valid only for units with SPED keypad device installed. Make sure the battery is seated securely in the battery holder. Make sure the tamper screw is secured to the SPED module.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Clear the error. If the error persists, replace the SPED keypad module.
Need a new keypad? Check out these ATM keypads for sale