Error Code 203
Error Code 203: SPED KEYPAD IS NOT REPLYING TO MAIN BOARD
1. Make sure all cables are seated securely at the SPED board and their other termination points.
2. Make sure the tamper screw is secure to the SPED Module. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Clear the error.
4. If the error persists, replace the SPED keypad module.