Error Code 195
Error Code 195: RECEIPT PRINTER OUT OF PAPER
1. Replenish the paper.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Clear the error.
4. Make sure that the ribbon cable from the docking station to the low paper sensor assembly is fastened at both ends of the cable and the orientation of the cable is correct.
5. If the error persists, possible causes of the problem may be the low paper sensor assembly, the docking station, the main board, or cables.