Error Code 192




1. Enter the Management Functions and verify that all terminal parameters have been entered correctly.

2. Verify that the telephone line is operational.

3. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.

4. If the error persists, possible causes may be the modem or main board assembly.

Need a new mainboard? Check out these ATM mainboards for sale

Previous Post Next Post