Error Code 183
Error Code 183: RECEIPT PRINTER PAPER IS LOW
1. Install a new roll of paper if needed.
2. If this does not correct the problem, verify that the paper low sensor is correctly attached to the paper bracket and that the cable between the paper low paper feed assembly and the docking assemby is undamaged and securely connected at both ends.
3. The paper low sensor may be dirty and require cleaning.
4. Otherwise, the possible causes of the problem may be a defective paper low sensor, cable, or docking assembly. A temporary fix to this problem may be to set the "low receipt paper" parameter to "in service" so that the terminal software does not read the input from the low paper sensor. When this is done, the terminal will operate normally until it is completely out of paper. Then it will go "out of service" for and error code 195 "out of paper."