Error Code 135
Error Code 135: FEED SENSOR BLOCKED AS REPORTED BY STATUS CHECK
1. Inspect the feed path and feed sensors for jammed currency and broken components. The feed sensor may be dirty. Clean as needed with a soft brush and vacuum cleaner.
2. Power down the ATM in the proper sequence. From the Main Menu screen, select System Parameters (5) followed by Shut Down the Terminal (4). When the indication that it is safe to turn off the terminal is displayed on the screen, push the Power ON/OFF switch to the OFF position. After about ten seconds, push the Power ON/OFF switch to the ON position to start the terminal.
3. Purge the dispenser with the PURGE command.
4. Complete several test dispenses to verify correct operation. If the problem persists, replace the dispensing mechanism.
Need a new dispenser? Check out these ATM dispensers for sale